Status Indicators And Audible Alert Tones - Maxon SP - 150 Serie Instrucciones De Operation

delete anunwanted channel from the scan list. Nuisance delete
can be activated only when receiving the unwanted channel.
The feature can be programmed alone on a single option
button or combined with the monitor function. Turning the
unit off and on will return the unit to the original scan list.
Talk-around: When programmed, pressing the appropriate
•
option button once will activate talk-around mode. Pressing
the option button again, or rotating the channel selection knob
will disable talk-around function.
Scan: When programmed, pressing the appropriate option
•
button will enable the radio's programmed scan function.
Edit Group Scan List: When programmed, allows editing
•
of channels you wish to scan.

Status Indicators and Audible Alert Tones

Your SP-150 has a sophisticated microprocessor control
which provides a series of audible alert tones. Upon initial
power up, a single tone indicates that the self-test of the
microprocessor functions have been completed satisfactorily.
A series of tones may sound with any of these conditions:
Busy System Queuing, indicates your radio has been placed
•
in the queuing mode and is attempting to access the System
Low battery condition
•
programmed frequency
(The following are all initially programmed into the radio
by your Dealer)
that is already in use when busy channel lockout has been
programmed
indicates you may begin speaking
indicates you are denied transmission on that System /
Channel Time-Out-Timer indicates you have exceeded
•
the maximum transmission time
•
Attempt to transmit on a System /Channel
•
Call Received
•
Selecting a Channel with no
Clear-to-Talk/Transmit
•
Transmit not available
•
11