SSS Siedle Classic CZAM 600-01 Informacion De Producto página 8

English
Application
For an optical display of the oper­
ating status:
Four backlit LED symbols each
signal the different statuses: "Call",
"User unattainable", "Speech" and
"Door opened".
The optical signal can be optically
supported by an acoustic feedback.
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Mounting and service
Information regarding mounting and
module replacement can be found
in the installation instructions for the
Classic door station.
1/2 Optical and acoustic
signalling
1 Call
2 User unattainable
3 Door opened
4 Speech
8
CZAM 600-...
for Siedle In­Home bus or Siedle
Multi
Terminal assignment
CZAM 600-...
b+ Supply 12 V AC,
c– 15–32 V DC
BU Control input transducer
S1 Control input for "call"
status display
S2 Control input for "speech"
status display
S3 Control input for
"door opened"
status display
S4 Control input for
"cannot be reached"
status display
L01 RF output
L02
H/L Impedance high/low
Note
As this is used in different systems,
not all the terminal connections are
always required. For details, see the
wiring diagrams.
Terminal plans
3 In conjunction with the In-Home
bus, actuation takes place via a
ribbon cable from the CBTLM 651-...
or CBTLE 050-04 ES7007.
4 In conjunction with the Multi
system, actuation takes place via
a SCM 640-...
Activating the acoustic feedback
On the back of the CZAM 600-... is
a DIL switch which can be used to
activate the acoustic feedback for
the status messages.
Connection of an external induc-
tion loop system or AF amplifier
(only In­Home bus)
Audio OUT: The AF output signal is
applied to terminals L01, L02.
The output impedance is 10 kOhm.
By inserting a bridge from L01 to
H/L, the output impedance is set
from 10 kOhm to 600 Ohm – in
accordance with a 0 dB interface.
5 To output the NF signal, the ribbon
cable from the CBTLM 651-... or
CBTLE 050-04 ES7007 must be
connected to the CZAM 600-... For
the CZAM 600-..., the NF output
level also depends on the volume
setting of the CBTLM 651-... or
CBTLE 050-04 ES7007.
Specifications CZAM 600-...
Output impedance NF signal:
10 kOhm, with bridge 600 Ohm
Operating voltage: 12 V AC,
15–32 V DC
Operating current: 70 mA
Protection system: IP 54
Ambient temperature:
–20 °C to +55 °C
Inputs (BU, S1, S2, S3, S4):
12 V AC, 15–32 V DC