Flow Cell And Cuvette; Lamp And Sipper Pump - Selecta S-2000 Manual De Instrucciones

INSTRUCTION MANUAL CODE 80202 REV A
Figure 5.2 Acceding to lamp, flow cell
and sipper pump.
Pump body
Pump pipe
J
.P. SELECTA s.a.u.
Feb/2012

5.4 Flow cell and cuvette

The following sketches will help you locate and identify the flow cell parts.

5.5 Lamp and sipper pump

1. Remove the lamp cover and flow cell cover.
Figure 5.3 Sipper pump
The source lamp becomes extremely hot during operation;
Look directly into the light path of the lamp may cause eyes damage.
If the lamp needs to be changed, always switch off the lamp by switching off the
instrument and then wait until the lamp has cooled down.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
(It can be modified without notice)
Flow cell. Sipper pump.
Sample.
CAUTION
never touch the lamp when it is on!
Clip button
Adjustment screw
Clip bar
Generator
Copper column
Figure 5.4 Lamp holder
Tel 34 937 700 877 Fax 34 937 702 362
Page: 27