Dr. Schandelmeier MediSafe Space Traveller Manual De Instrucciones página 9

• Car interiors can become very hot when left standing in direct sunlight. Metal fittings on the
seat and harness may become hot and should be covered up.
• Do not place heavy objects on the parcel shelf, which could in the event of an accident cause
injury to passengers.
• Do not attempt to dismantle, modify or add to any part of your child seat or harness.
• A child must NEVER be left unattended in the car whilst restrained.
• If in doubt about the use or installation of this product, please contact our customer helpline on
the back of the instruction manual.
• Please retain your receipt, as this is your proof of purchase in the event of a claim.
• Important note: In accordance with the law 23/2003 of 10 July 2003 relating to guarantees
in the Sale of Consumer Goods and EU Directive issued in the area of consumer protection, this
products guarantee covers the two years subsequent to delivery of the product.
• Please save the user instructions for future.
• IMPORTANT! The child seat must be used with the seat cover. A replacement cover is available
from your product stockist or contact your product customer service department. We advise
that child car seats should not be bought or sold second-hand. Please dispose of your child seat
safely. Do not sell or pass it on. After an accident, the child seat and your car seat belts should
be replaced. Although they may look undamaged, if you were to have another accident the
child seat and your car seat belts may not be able to protect your child as well as they should.
Adjusting the belt system to the size of your child
The child seat must only be installed using a lap and diagonal seat belt.
• Release the buckle by sliding the red button downwards
the harness .
D
3
• Place your child in the seat and check the height of the shoulder straps for correct positioning.
• The shoulder straps
D
closest to the top of your child's shoulders.
• Once the top slots have been reached, you can continue to use the seat but only until the child's
eyes are level with the top of the seat or their weight exceeds 18 kg.
• To adjust the height of the shoulder straps, press the silver harness release lever
both harness straps
D
• From behind the seat, unhitch the harness straps
through to the front of the seat.
the front of the seat.
must be threaded through the slots
5
forward to create slack.
Untie the shoulder pad cords and pull these through to
7
– 9 –
and at the same time pulling out
E
in the cover and seat shell that are
S
6
from the yoke
D
1
4
and pull
G
and pull the straps
P