Sunbeam 9710 Manual De Instrucciones página 3

Ocultar thumbs Ver también para 9710:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Safety Information
• Always remove protective cover before operating (if applicable).
• Do not set the protective cover over the unit until it is turned off and completely cooled down.
• Check for leaks after not using the unit for long periods of time.
• Children should never operate this unit. Children must be supervised while near this unit.
• Keep gas tank at least 5 feet away from unit when lit. (if external tank)
• The maximum gas supply pressure is 250 psi.
• All installation and repair should be done by a qualified professional. This unit should be inspected annually and
cleaned regularly.
• Inspect all elements of this heating unit before each use. If there is damage, the burner must be replaced.
• Keep the hose out from any pathways to eliminate any accidental damage. (if external tank)
• Be aware of the hazards of high temperatures and stay away from the unit to avoid any burns or injury.
• The gas supply tank should be constructed and marked with the specifications for the LP gas tanks of the U.S.
Department of Transportation or the National Standard of Canada CAN/CSA-B339, LP gas tanks, spheres and tubes for
Transportation of Dangerous Goods; and Commission.
• The LP gas tank must have a listed overfilling prevention device and a QCCI or Type I, (CGA810) LP gas tank
connection.
• This heating appliance should not be used on plastic or artificial wood decks.
• Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns
or clothing ignition.
• Young children should be carefully supervised when they are in the area of the appliance.
• Clothing or other flammable materials should not be hung from the appliance or placed on or near the appliance.
• Any guard or other protective device removed for servicing the appliance shall be replaced prior to operating the
appliance.
• Installation and repair should be done by a qualified service person. The appliance should be inspected before use and
at least annually by a qualified service person. More frequent cleaning may be required as necessary. It is imperative that
the control compartment, burners and circulating airways of the appliance are kept clean.
IF APPLICABLE:
• Allow heating item to cool completely before placing on lid.
• DO NOT use heating item while lid is installed. Always remove the lid while heating item is in use. Only use the
regulator and hose assembly provided with this unit. Replacement parts must be supplied directly by Jay Trends.
Inspect the burner before use of this unit. If the burner shows any kind of damage, do not operate the appliance. For
assistance with repair or replacement of the burner or any other parts, call Jay Trends at 1-877-387-3639.
NOTE: You must follow all steps to properly assemble this heating item. Make sure the gas valve is turned "OFF" before
assembling. Do NOT attempt to assemble without proper tools.
Min. Clearance
48 in. (121.9 cm)
Min. Clearance
48 in. (121.9 cm)
Min. Clearance
48 in. (121.9 cm)
Do not operate this fire table if
Firebowl Pan and Flame Glass are wet!
Combustible materials should not be within 72 in. of the top of
Min. Clearance
48 in. (121.9 cm)
the unit, or within 48 in. around the entire unit.
CAUTION
1-877-387-3639
|
Page 3
Tabla de contenido
loading

Tabla de contenido