Limit (Lim) - Circutor MD 5060e Manual De Uso

5.3. Limit (LIM)

Press key in order to determine the lower insulation limit for type
"Pass / Fail test". Select this value using and keys. Possible
values are 10 MΩ, 100 MΩ, 1 GΩ or 10 GΩ.
During a "Pass/ Fail test", the MD-5060e will indicate when the insulation
resistance is lower than the programmed limit, with an intermittent beep
and the key led flashing. The key led will remain flashing until the
end of tests, or until the measurement of the resistance value is greater
than the programmed limit.
To return to normal mode, press the key and use the or to
select the "- - -" option.
51