Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Before to use this instrument the User guide and Safety warnings must be read
and understood.
•
Safety procedures and rules for working near high voltage energized systems
must be observed during the use of this equipment. The generated voltages may
be dangerous.
•
Do not connect or disconnect the test leads during the measurement.
Be careful not to make short-circuit between the high voltage terminals and the
•
"+R" or "Guard" terminals while a measurement is running, because it could be
dangerous for the operator.
Be sure that there are not any voltage difference between the points to which the
•
insulation tester will be connected to, neither between them and ground.
•
The panel, terminals and connectors of the equipment must stay dry and clean.
This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.
Used symbols
Caution, risk of electric shock.
Caution, refer to User guide.
Equipment complies with current EU Directives.
Safety warnings
38
Capítulos
Tabla de contenido
