Sony TRINITRON KV-27FS13 Manual De Servicio página 158

Channel Fix
Auto Program
Channel
Skip/Add
Channel
Label
Label up to 40
channels with
their call letters


Favorite Channel, Channel Skip/Add, and Channel Label cannot be used
when Channel Fix is set.
2-6: Select when you want to control all channel selection
through a cable box or VCR. Select the appropriate channel
(usually 3 or 4) and use the cable box's or VCR's remote
control for channel selection.
Video 1: Select from available video inputs when you have
connected video equipment (e.g. satellite receiver) and you
want your TV fixed to it.
AUX 2-6: Use this setting instead of the 2-6 if you want to
change channels using a cable box, VCR or satellite
receiver and you've connected it to the AUX input.
Perform Auto Program whenever setting up your TV.
It will cycle through all available channels and program
any receivable channels.
Use this feature after you run Auto Program to skip
unwanted channels or add new ones.
1 Use the buttons or the [CH+/-] buttons to select
0 9
the channel.
2 Press to Skip or Add (only one option will be
available).
With the Channel Label window open:
, then press F or
1 Press
channel number.
2 Press to activate the channel.
3 Press then press
4 Press F or
to display the first call letter or number of
the caption and press
press to activate.
Using the Menus
until you reach the desired
to highlight the label field.
to select it. When finished,
27