Configure The Adapter - Cisco Systems Linksys WMP54GS Manual Del Usario

3

Configure the Adapter

A
After installing the Adapter, the
Windows XP Wireless Zero
Configuration icon will appear
in your computer's system tray.
Double-click the icon.
B
The screen that appears will
show any available wireless
network. Select the network you
want.
If this network has WEP
encryption enabled, go to
Step C.
If this network does not have
WEP encryption enabled, the
screen shown in Figure B will
appear. Make sure the box
next to Allow me to connect to
the selected wireless network,
even though it is not secure is
checked. Then click Connect,
and go to Step D.
C
The screen shown in Figure C
will appear. Enter the WEP key
of your wireless network in the
Network key field, and re-enter
it in the Confirm network key
field. Then click Connect.
D
The Wireless Zero Configuration
icon in your system tray will
notify you if your connection is
active.
Congratulations! The installation of
the Wireless-G PCI Adapter with
SpeedBooster is complete.
4
B
C
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
Website
http://www.linksys.com/international
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
WMP54GS-QIG_XP-uk/eu/la-40517NC KL