Operation - Eurofred VRX Serie Manual De Instrucciones

INSTALLATION
GB

OPERATION

Storing food
To get the best results from your appliance, follow these instructions:
• Only store foodstuffs in the appliance when it has reached the correct operating temperature.
• Ensure GN container bays are full at all times, even if the GN containers are unused or empty. Empty bays will greatly reduce effi
ciency of the appliance.
• Always close the door,lid or drawer when not in use.
• Do not place uncovered hot food or liquid inside the appliance.
• Wrap or cover food where possible.
• Do not obstruct the fans inside the appliance.
• Avoid opening the doors/drawers for prolonged periods of time.
• The maximum load for a shelf/drawer is 20 kg.
• The food must be put into container before placed into cabinet or on the shelf. Food must not be placed into food cabinet directly.
• When wet food/vegetable is put in the Saladette, it's normal that ice (snow) appears on the surface.
Turn on
• Close the door/lid/drawer of the appliance.
• Ensure the power switch is set to [O] and turn on at the socket.
• Switch on the Power [I]. The current temperature within the appliance is displayed.
• The on the control panel will fl ash for 3-min to indicate a delay between the motor compressor being stopped and then
restarted.
Open/close the lid or drawer
WARNING: The sliding lid does not have a locking mechanism. Always make sure that the lid is in the 'half-open' position
before opening.
WARNING: Do not pull the drawer out of its full open position to avoid any hurt.
The lid of the GSA is multi-positional:
• With the lid closed, slide the panel back into the half open position. This allows partial access to the GN container trays.
• Lift the lid up and back so the hinge settles into the support slot.
• Lift the lid up and completely back so the GN container trays are completely exposed.
Bracket
Glass Panel
Bolt Assembly
Bush
Bolt Assembly
6