Troubleshooting; Warranty - Eurofred VRX Serie Manual De Instrucciones

TROUBLESHOOTING

If your appliance develops a fault, please check the following table.
Fault
The appliance is not working
The appliance turns on, but the
temperature is too high/ low
The appliance is unusually loud

WARRANTY

A statutory warranty applies for this product.
Damages caused by wrong treatment or operation, by false placement or storage, improper con-
nection or installation, as well as force or other external influences are not covered by this warranty.
We recommend careful reading of the operating instructions as it contains important information.
Note:
In case this product does not function correctly, please firstly check if there are other reasons,
1.
e.g. for electrical appliances interruption of the power supply, or generally incorrect handling
are the cause.
2. Please note that, where possible, the following documents or rather information should be
provided together with your faulty product:
- Purchase receipt
- Model description/Type/Brand
- Describe the fault and problem as detailed as possible
In the case of a claim for guarantee or defects, please contact the seller.
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Too much ice on the evaporator
Condenser blocked with dust
Appliance is located near a heat source or
air flow to the condenser is being interrupted
Ambient temperature is too high
Unsuitable foodstuffs are being stored in
the appliance
Appliance is overloaded
Loose nut/ screw
The appliance has not been installed in a
level or stable position
11
Action
Check the unit is plugged in correctly and
switched on
Call your agent or qualifi ed technician
Replace the fuse (GB)
Check power supply
Call your agent or qualified technician
Defrost the appliance
Call your agent or qualifi ed technician
Move the refrigerator to a more suitable
location
Increase ventilation or move appliance to a
cooler position
Remove any excessive hot foodstuffs or
blockages to the fan
Reduce the amount of food stored in the
appliance
Check and tighten all nuts and screws
Check installation position and change if
necessary
GB