Speaker Setup; Basic Operation - KlipXtreme Vibe360 KBS-800 Manual Del Usario

B. Speaker set up
1. How to disassemble the speaker
• Remove the silicon sleeve from the speaker.
• Slightly rotate both units in opposite directions until they completely unlock and come
apart, as it is shown below.
2. How to assemble the speaker
• Align the speaker, as it is shown below.
• Slightly rotate the speaker units in opposite directions, until they become
fully locked.
• Verify that the main panel is properly aligned.
III. Basic operation
Charging the speaker
Note: The speaker units must be charged individually. Please follow these procedures to
charge the battery.
• Plug one end of the supplied micro USB cable into the speaker micro USB port and the
other end to the USB port of your computer or to a 5V USB adapter to charge the
battery.
• The battery takes around 3-4 hours to fully charge.
• Make sure that the speaker is fully charged before using it for the first time.
• While the speaker is being charged, the LED glows red.
• When the battery has reached full capacity, the LED turns off.