Advanced Operation - KlipXtreme Vibe360 KBS-800 Manual Del Usario

IV. Turning the speaker units on or o , and
enabling the TWS feature
• To turn ON the speaker, press and hold the Power
on each unit, simultaneously. The blue LED will start blinking quickly in one of the
speakers, automatically making it the secondary unit. The LED will eventually turn
solid blue when paired to the primary device.
• The remaining unit with the blinking LED will automatically become the primary device.
The LED will remain blinking while it is in pairing mode with your mobile device.
Note: The TWS feature is automatically enabled.
• Press and hold the Power button again for 2 seconds to turn each unit off. However, if
the two are linked, then both will be powered off simultaneously upon pressing this button
on the primary unit.
• Every time the speaker units are switched on and off, a tone will sound to indicate the state
in which each unit currently is.
V. Advanced operation
Note: Before installing this product, please make sure your device has the built-in
Bluetooth feature available
®
A. Pairing the speaker with your mobile device in TWS mode
1. Press and hold the Power button
button for about 2 seconds
on both speakers to turn them on simultaneously.
Note: As these are two individual speakers, the secondary speaker will automatically pair to
the primary speaker (the LED of the secondary speaker will be solid blue, as it is paired to
the primary speaker).
2. Set your Bluetooth phone to "discover" the wireless speaker.
®
3. Place both devices not more than one meter away from each other.
4. The Power button
LED for the primary unit will start blinking to indicate that the
device has entered into the pairing mode and is ready to be detectable for the first time.
5. On your mobile phone, tap the newly discovered audio device (KBS-800) displayed in
the Bluetooth ® list.
6. If you have a lower Bluetooth ® version, you may be prompted to enter the passkey 0000
(4 zeros).
7. If pairing is successful, a tone will be heard and the LED light will turn solid blue. If after 60
seconds the pairing process fails, please repeat steps 1 through 6 described above.
8. We recommend turning off the device when not in use. The speaker will shut off
automatically after a period of inactivity, as long as it is not in the Bluetooth
B. Pairing the speaker units with your mobile device individually
1. First, press and hold the Power button
speaker) to turn it ON.
2. Set your Bluetooth ® phone to "discover" the wireless speaker.
3. The Power button LED will start blinking to indicate that the device has entered into
the pairing mode and is ready to be detectable for the first time.
4. On your mobile phone, tap the newly discovered audio device (KBS-800) displayed in
the Bluetooth ® list.
mode.
®
on the secondary speaker (will be labeled on