Setting The Timer - Waring Commercial WIH200 Serie Manual Del Usuario

OPERATION
Once the unit is plugged into
an electrical outlet, place the
induction-ready cookware on
the glass top and press the
ON/OFF button to turn the unit
on. The LED display will show
"---" and the POWER LEVEL and TIME indicator lights will flash. This
indicates that a cooking function has not been selected. If no further
action is taken, the unit will automatically turn off after 30 seconds.
To start using the unit, press the POWER/TIMER button. The POWER
LEVEL indicator light will illuminate. The cooktop will automatically
default to the Power Level 5 setting.
EMPTY-PAN DETECTION
This unit has cookware detection:
• If the unit is turned on and cookware is not put on the cooktop
glass, the unit will beep and turn off after 60 seconds.
• If the cookware is not induction compatible, the unit will beep
and automatically turn off after 60 seconds.
• If you remove the cookware from the cooking surface during the
operation mode, the unit will beep and will automatically turn off
after 60 seconds.
10 Power Level settings for WIH200, from Low (1) to High (10)
To adjust the Power Level settings to the desired setting, press "+" or
"-" buttons. The "+" increases the setting. The "-" lowers the setting.
The LED display will show the current POWER LEVEL setting. The
unit can be used without setting the timer.

SETTING THE TIMER

If you do want to set the timer, press the POWER/TIMER button.
(Indicator light labeled TIME will
illuminate.) Default is 0. Press
"+" or "-" to set the timer to your
desired cooking time. The timer
advances in 5-minute increments
and decreases in 1 minute
increments. If you press and hold
the "+" or "-" button, the timer will advance rapidly. Once you have
finished setting the timer, it will stay in TIMER mode.
4