Cleaning And Maintenance - Osmofilter LITEL 100 J-100 Manual De Usuario

USER'S MANUAL

6. CLEANING AND MAINTENANCE

No cutting PE Pipe with
non-dedicated knife
Check whether all functions of product operate
normally.
Check whether tubes of product leaks water
(three-way valve, external PE pipe, internal joints.
etc.).
Check whether the key parts are due to maintenance
period, and maintain and change it timely. Check
whether the joints and PE pipes which are used for
more than two years are out of shape and aging to
decide whether they need to be changed.
The new filter shall be washed for 10-20 minutes until
there is no black water in water outlet.
Check whether PE pipes connected with bulkhead
union are cut (it need be cut for the length of 20 mm)
and inserted in and connected again. The inserted
depth of PE pipe shall be 15-17 mm. Install measure
the PE pipe before installation, and make remark on it
before inserting it into machine. The inserted depth
shall reach to place of the black spot.
Cut PE pipe by dedicated knife designed for cutting
tube, bevel connection and burrs are not allowed.
7. CURRENT MAINTENANCE
NOTES:
To ensure product operates normally and avoid
malfunction caused by inappropriate maintenance
which affects the security of drink water, the water
purifier shall be maintained in the process of daily using.
No operating No humid
in O C area
Avoid using strong volatile solvents like soap,
detergent, diluent, gasoline ethyl alcohol, etc. in
cleaning and maintenance of product, or it will result
in cracking, scratching and turning colours.
No water leakage from pipe
No direct No washing by
sunlight strong volatile solvent
Keep cleaning in jug, forbid sensor which blocks liquid
level in the jug.
Avoid washing machine by direct watering.
Check whether there is dropsy around product to
judge whether they leak water.
Check whether outlet water faucets of product leak
water.
Check whether the enriched water tubes of product
are stationary and tight.
Check whether the power is off or water inlet switch
(three-way ball valve) is closed before going out for a
long time.
No side lay, laying down or inverted product.
Do not change the joints and tubes of product by
yourself at random.
When the inlet water temperature is below 0
inlet switch shall be closed and water in water purifier
shall be drained to avoid freezing and frost cracking.
Do not remove, install or change filter by yourself.
Do not put product and tube under the direct sunlight.
Use new flexible tube subassembly which is the
accessary of machine, the old flexible tube subas-
sembly cannot be reused.
7.1. MAINTENANCE STEPS
NOTES:
To ensure your water purifier operating in the best
operational condition and the security of drink water,
aftersales service site will make a reservation and remind
you (or you can contact with local after-sales service
site) at fixed period to have a maintenance for
equipment and change of filter. To ensure the service
quality, you can supervise our maintenance service.
1.
Check whether the functions of machine are normal,
the power is off or the water valve is closed.
2.
Check whether overall appearance of machine is out
of shape.
07
EN
, water
Close ball valve of
water inlet.