Instructions - Osmofilter LITEL 100 J-100 Manual De Usuario

USER'S MANUAL
WARM PROMPT
1.
Before taking water, please make sure that the flip lid
of water connection is opened, the lid is closed in
place, and that the liquid level sensor in the lid is in
the correct position with the jug body groove.
2.
Press the button shortly to turn on and off the water
intake function. When the water intake function is
turned on (the indicator light is on), water can be
taken automatically take after putting the jug.
3.
In the process of taking water, the machine will stop
automatically when the jug is full. Taking away the jug
or press the button shortly will also stop the water.
4.
If you use other containers to take water, please press
the button for 3 seconds. The water will be collected
for 5 minutes by default. You can press the button
shortly to stop the water.
5.
Do not block the liquid level sensor in the lid. Do not
wash the lid with high temperature water or place the
lid in a high temperature environment.
6.
Please wipe the base with a cloth. Do not wash the
base directly with water or soak it in water.

3. INSTRUCTIONS

CAUTIONS:
Installation should be done by professionals.
FIRST USE INSTRUCTION
1.
Call the service department to schedule an appoint-
ment for the installation of the water purifier.
2.
The installation master shall install, flush and debug
the whole machine according to the maintenance
procedures.
Install
3.
Users can use the water purifier normally. Water is
taken from faucet in terms of water storage tank type.
Flush Debug
STARTING UP
1. Open the three-way ball valve, and then plug in:
2.
The whole machine is powered on by default, and the
indicator lights of power filter life are on.
SHUTDOWN
1.
Close the three-way ball valve, and then unplug the
power cord:
04
EN