English
This is a brief version of BCST-50 manual instruction. For more detailed function
illustration, please go to www.inateck.com to download the detailed user manual or
time.
If you have any problem or suggestion with our product, please contact us via
1. Use of BCST-50
When using BSCT-50 to scan the barcode, please focus the red light on the barcode
to scan. The red light is to help the user to aim at the bar code; The white light is to
help the user to scan barcodes under the condition of insufficient light.
Red aiming beam setting
The red aiming beam that comes out the scanner locates barcode during scanning.
Just target the red aiming beam on the barcode you want to read. Users can opt to
any mode according to their varied working environments.
Normal: Press Scan button, and the scanner gives off red aiming beam.
Aiming beam lit: When the scanner is connected to power, the red aiming beam
would be lit.
No aiming beam: Aiming beam is off under any working mode.
Normal (default setting)
No Aiming beam
Aiming beam lit
Luminous light setting
White luminous light can illuminate barcode for scanning. Recognition performance
and adaptability under dim light of the scanner would be improved with white
light focusing on target barcode. Users can adapt the scanner to either of the below
modes according to their varied working environments.
Normal: Press Scan button, and scanner gives off white luminous light
Luminous light lit: When the scanner connects power, scanner is lit white.
1
No luminous light: No luminous light under any circumstances.