Complete The Installation - THE BOLD LOOK OF KOHLER K-770 Guia De Instalacion

Finished
Deck
Material
Bath

6. Complete the Installation

If your bath requires grip rails, install them now according to the packed instructions.
Cover the framing with water-resistant wall material.
Seal the joints between the bath rim edges and the water-resistant wall material with silicone
sealant. Tape and mud the water-resistant wall material.
Install the finished wall material so it is 1/16" (2mm) above the enameled surface. Seal the joints
between the bath rim and the finished wall with silicone sealant.
Install the faucet trim according to the faucet manufacturer's instructions.
Clean-Up
When cleaning up after installation, do not use abrasive cleaners, as they may scratch and dull the bath
surface. Use warm water and a liquid, non-abrasive detergent to clean the surface.
CAUTION: Risk of product damage. Do not allow cleaners containing petroleum distillates to remain
in contact with the surface for long periods of time.
Remove stubborn stains, paint, or tar with turpentine or paint thinner. Remove plaster by scraping with a
wood edge. Do not use metal scrapers, wire brushes, or other metal tools. You can use a powder-type
detergent on a damp cloth to provide mild abrasive action to any residual plaster.
1023721-2-A
Apply silicone
sealant to the edges
of the water-resistant
deck material and
the finished deck
Water-Resistant
Deck Material
Framing
Finished
Wall
Covering
Silicone
Sealant
Bath
6
Water-
Resistant Wall
Material
Vinyl
Bead
2x4
Studding
Kohler Co.