Reese 30892 Manual Del Usario página 9

FOR INSTALLATION WITH
M5 MOUNTING LEGS
WARNING: Failure to follow these instructions may result in property damage, serious injury, or death.
1) Make sure trailer is secure:
A. Blocks/Chocks are firmly against each trailer wheel to prevent any possible forward or rearward motion.
B. Trailer jacks are lowered and are firmly on the ground
2) Make sure truck is ready to unhitch:
A. Tailgate is lowered as necessary.
B. Electrical cable and breakaway switch cable are disconnected.
3) As truck and trailer may shift when unhitching, ensure no person or vehicle is in the vicinity of truck or trailer when
unhitching.
4) Remove bail pin from locking hole, and move handle to unhitching position (fig. 17) by pulling out and pushing handle
towards cab.*
5) Drive truck forward, slowly away from trailer.
*If there is tension between the truck and trailer, the truck or trailer may shift when handle is pulled. In this case, handle will start to return to ready-to-
receive position, but trailer will still uncouple.
©
2017 Horizon Global America Inc.
Product Instructions
M5 HEAD & CENTER SECTION
POTENTIAL LOCK DIMENSIONS
3/4" or greater
1-1/2"
or greater
Unhitching Procedure
Locking Hole
Trailer pin box
FIG. 16
Page 9 of 33
Ø 5/16" or less
FIG. 17
30884N 10/25/2017
Part Number:
30892 & 30884
Rev. A