Idiomas disponibles
Idiomas disponibles
5. Measuring Process
a.
After your body is in a comfortable position, press the " "
button. After a long "beep", BPM will verify itself, and LCD will
display all automatically. (See Picture 3)
b. Then you will see on screen "U1" or "U2" indicating the Group
of memory in which the measurement shall be recorded
(see Picture 3-1 & 3-2). If you want to change the group press the
"M" button and then press the " " button to confirm your choice.
c. After you confirm the current group, if it already has memory in
this group, LCD will show the latest result. (See picture 3-3) If the
machine has no memory, the LCD will show zeros.
(See picture 3-4).
d. A few seconds later, LCD shows a single "0". (See picture 3-5).
e. Then the monitor begins to pressurize automatically.
f.
During the measurement, the pressure number will appear on screen. The sign of heart will be displayed
intermittent while the pressure starts going down. (See picture 3-6 & 3-7).
g. After measurement, the result of systolic, diastolic and pulse rate will all display on LCD. The irregular
3-6&3-7)
3-6&3-7)
g.
After measurement, the result of systolic, diastolic and pulse rate will all display on
g.
After measurement, the result of systolic, diastolic and pulse rate will all display on
heartbeat symbol (if any) and blood pressure classification indicator will twinkle. (See picture 3-8). The results
LCD. The irregular heartbeat symbol (if any) and blood pressure classification indicator
LCD. The irregular heartbeat symbol (if any) and blood pressure classification indicator
are automatically recorded in the previously selected memory.
will twinkle.
will twinkle.
(See picture 3-8).
(See picture 3-8).
selected
memory.
selected
memory.
3-6&3-7)
h.
Press " " at the end of measurement to turn off the BPM. You can do the same if you want to stop the
g.
After measurement, the result of systolic, diastolic and pulse rate will all display on
LCD. The irregular heartbeat symbol (if any) and blood pressure classification indicator
measurement at any time. The BPM goes off automatically after a few minutes of no use.
will twinkle.
(See picture 3-8).
The results are automatically recorded in the previously
selected
memory.
Picture 3-6
Picture 3-6
Picture 3-6
Picture 3-7
h.
Press "O" at the end of measurement to turn off the BPM. You can do the same if you
h.
Press "O" at the end of measurement to turn off the BPM. You can do the same if you
h.
Press "O" at the end of measurement to turn off the BPM. You can do the same if you
want to stop the measurement at any time. The BPM goes off automatically after a few
want to stop the measurement at any time. The BPM goes off automatically after a few
want to stop the measurement at any time. The BPM goes off automatically after a few
minutes of no use.
minutes of no use.
minutes of no use.
6. Assessing High Blood Pressure for Adults
4. Assessing High Blood Pressure for Adults
4. Assessing High Blood Pressure for Adults
4. Assessing High Blood Pressure for Adults
The following standards for assessing high blood pressure (without regard to age or gender) have been
The following standards for assessing high blood pressure (without regard to age or gender) have
The following standards for assessing high blood pressure (without regard to age or gender) have
The following standards for assessing high blood pressure (without regard to age or gender) have
been established as a guideline according to WHO (World Health Organization). Please note that
other risk factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and
been established as a guideline according to WHO (World Health Organization). Please note that
been established as a guideline according to WHO (World Health Organization). Please note that
established as a guideline according to WHO (World Health Organization). Please note that other risk factors
may affect these figures. Consult with your physician for accurate assessment.
other risk factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and
other risk factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and
may affect these figures. Consult with your physician for accurate assessment.
may affect these figures. Consult with your physician for accurate assessment.
(e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and may affect these figures. Consult
with your physician for accurate assessment.
Classification of blood pressure for adults
0
0
0
Diastolic
(mmHg)
7. Reading Memory Results
a.
Press the "M"; the group "U1" will appear intermittent on the LCD.
If you want to change group, press the " " button, the "U2" group will
appear intermittent, if you want to go back again to the group "U1" just
press " " (see Figure 4 & 4-1). Once you choose the memory group,
press the "M" button to confirm your selection, the group number will
display constant.
b.
Once the group has been selected, the most recent result appears on
screen with the number 01. (See Picture 4-2) The irregular heartbeat (if
any) and the blood pressure classification will also appear together with
the time and date of measurement. To move to the following memory
press "M" and so forth until you reach the end of the memory or the result
that you are seeking for. (See picture 4-3)
35104_wrist BPM 7902B manual.indd 2
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
group press the "M" button and than press the "O" button to confirm your choice.
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
group press the "M" button and than press the "O" button to confirm your choice.
group press the "M" button and than press the "O" button to confirm your choice.
group press the "M" button and than press the "O" button to confirm your choice.
Picture 3
Picture 3-1
c.
After you confirm the current group, if it already has memory in this group, LCD will
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
show the latest result.
(See picture 3-3)
group press the "M" button and than press the "O" button to confirm your choice.
show zeros.
(See picture 3-4)
Picture 3
Picture 3
Picture 3-1
Picture 3-1
Picture 3-2
Picture 3
Picture 3-1
Picture 3-2
c.
After you confirm the current group, if it already has memory in this group, LCD will
c.
After you confirm the current group, if it already has memory in this group, LCD will
Picture 3-3
c.
After you confirm the current group, if it already has memory in this group, LCD will
show the latest result.
show the latest result.
show the latest result.
(See picture 3-3)
(See picture 3-3)
(See picture 3-3)
If the machine has no memory, the LCD will
If the machine has no memory, the LCD will
If the machine has no memory, the LCD will
show zeros.
(See picture 3-4)
show zeros.
d.
(See picture 3-4)
A few seconds later, LCD shows a single "0".
show zeros.
(See picture 3-4)
Picture 3
Picture 3-1
Picture 3-2
c.
After you confirm the current group, if it already has memory in this group, LCD will
show the latest result.
(See picture 3-3)
If the machine has no memory, the LCD will
show zeros.
(See picture 3-4)
Picture 3-3
Picture 3-3
Picture 3-4
Picture 3-5
Picture 3-3
Picture 3-4
d.
A few seconds later, LCD shows a single "0".
d.
A few seconds later, LCD shows a single "0".
e.
Then the monitor begins to pressurize automatically.
(See picture 3-5)
(See picture 3-5)
d.
A few seconds later, LCD shows a single "0".
(See picture 3-5)
f.
During the measurement, the pressure number will appear on screen. The sign of heart
Picture 3-3
Picture 3-4
will be displayed intermittent while the pressure starts going down.
d.
A few seconds later, LCD shows a single "0".
(See picture 3-5)
Picture 3-5
Picture 3-5
Picture 3-5
e.
Then the monitor begins to pressurize automatically.
e.
Then the monitor begins to pressurize automatically.
e.
Then the monitor begins to pressurize automatically.
f.
During the measurement, the pressure number will appear on screen. The sign of heart
f.
During the measurement, the pressure number will appear on screen. The sign of heart
f.
During the measurement, the pressure number will appear on screen. The sign of heart
Picture 3-5
will be displayed intermittent while the pressure starts going down.
will be displayed intermittent while the pressure starts going down.
will be displayed intermittent while the pressure starts going down.
e.
Then the monitor begins to pressurize automatically.
f.
During the measurement, the pressure number will appear on screen. The sign of heart
will be displayed intermittent while the pressure starts going down.
The results are automatically recorded in the previously
The results are automatically recorded in the previously
Picture 3-7
Picture 3-7
Picture 3-8
Picture 3-8
Picture 3-8
5. Reading result in Memory
5. Reading result in Memory
a. Press the "M"; the group "U1" will appear intermittent on the LCD. If you want to change
WHO/ISH Definition and Classification of Blood Pressure Levels
group, press the "O" button, the "U2" group will appear intermittent, if you want to go back
a. Press the "M"; the group "U1" will appear intermittent on the LCD. If you want to change
again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory
group, press the "O" button, the "U2" group will appear intermittent, if you want to go back
again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory
group, press the "M" button to confirm your selection, the group number will display
constant.
group, press the "M" button to confirm your selection, the group number will display
constant.
5. Reading result in Memory
5. Reading result in Memory
a. Press the "M"; the group "U1" will appear intermittent on the LCD. If you want to change
a. Press the "M"; the group "U1" will appear intermittent on the LCD. If you want to change
group, press the "O" button, the "U2" group will appear intermittent, if you want to go back
group, press the "O" button, the "U2" group will appear intermittent, if you want to go back
again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory
again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory
group, press the "M" button to confirm your selection, the group number will display
group, press the "M" button to confirm your selection, the group number will display
constant.
constant.
Picture 4
Picture 4
b. Once the group has been selected, the most recent result appears on screen with the number
01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification
b. Once the group has been selected, the most recent result appears on screen with the number
will also appear together with the time and date of measurement. To move to the following
01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification
will also appear together with the time and date of measurement. To move to the following
memory press "M" and so forth until you reach the end of the memory or the result that you
Picture 4
Picture 4-1
Picture 4
Picture 4-1
are seeking for. (See picture 4-3)
memory press "M" and so forth until you reach the end of the memory or the result that you
are seeking for. (See picture 4-3)
b. Once the group has been selected, the most recent result appears on screen with the number
b. Once the group has been selected, the most recent result appears on screen with the number
01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification
01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification
will also appear together with the time and date of measurement. To move to the following
will also appear together with the time and date of measurement. To move to the following
memory press "M" and so forth until you reach the end of the memory or the result that you
memory press "M" and so forth until you reach the end of the memory or the result that you
are seeking for. (See picture 4-3)
are seeking for. (See picture 4-3)
Picture 4-2
Picture 4-2
c. Press "M" again after the last memory to turn off the machine or it will power off after a few
c. Press "M" again after the last memory to turn off the machine or it will power off after a few
minutes of no use. To exist Memory at any point press "O" and the machine will turn off
immediately.
minutes of no use. To exist Memory at any point press "O" and the machine will turn off
immediately.
Picture 4-2
Picture 4-3
Picture 4-2
Picture 4-3
c. Press "M" again after the last memory to turn off the machine or it will power off after a few
c. Press "M" again after the last memory to turn off the machine or it will power off after a few
minutes of no use. To exist Memory at any point press "O" and the machine will turn off
minutes of no use. To exist Memory at any point press "O" and the machine will turn off
immediately.
immediately.
c.
Press "M" again after the last memory to turn off the machine or it will
power off after a few minutes of no use. To exit Memory at any point press " "
and the machine will turn off immediately.
d. If it has no memory (or all memories have been deleted), the LCD will show
Picture 3-2
"0" for systolic, diastolic, heart rate, and show "00" for the numbers of memory.
If the machine has no memory, the LCD will
(See picture 4-4) Press the " " button and the machine will power off.
d. If it has no memory (or all memories have been deleted), the LCD will show "0" for systolic,
diastolic, heart rate, and show "00" for the numbers of memory. (See picture 4-4) Press the
"O" button and the machine will power off.
Picture 3-2
Picture 3-4
(See picture 3-5)
Picture 4-4
6. Deletion of Memories
Press the "M" button, choose the group of memory you want to delete, once one of the readings is
displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again
"M" and it will power off.
Picture 3-4
(See picture
8. Deletion of Memories
diastolic, heart rate, and show "00" for the numbers of memory. (See picture 4-4) Press the
Press the "M" button, choose the group of memory you
"O" button and the machine will power off.
want to delete, once one of the readings is displayed, press
(See picture
(See picture
(See picture
"M" and hold for three seconds or until you see "--" (see
(See picture
Figure 5) Press again "M" and it will power off.
9. Shut Down
6. Deletion of Memories
After each measurement press the " " button to power off the machine. After
Press the "M" button, choose the group of memory you want to delete, once one of the readings is
displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again
one minute of non-use the machine will power off.
"M" and it will power off.
Abnormality & Troubleshooting (1)
Abnormality
LCD shows low battery
symbol
LCD shows "Er 0"
LCD shows "Er 1"
LCD shows "Er 2"
LCD shows "Er 3"
LCD shows "Er 4"
LCD shows "Er 5"
LCD shows "Er 6"
LCD shows "Er 7"
LCD shows "Er 8"
Picture 4-1
Picture 4-1
If you cannot resolve the problem you can contact the
factory or customer service department
1-866-373-2824
Distributed by
Diabetic Supply of Suncoast, Inc.
Picture 4-3
Picture 4-3
HC 3 Box 7017
Dorado, PR 00646
www.dsosi.com
Picture 5
d. If it has no memory (or all memories have been deleted), the LCD will show "0" for systolic,
diastolic, heart rate, and show "00" for the numbers of memory. (See picture 4-4) Press the
"O" button and the machine will power off.
Picture 4-4
Picture 5
6. Deletion of Memories
Press the "M" button, choose the group of memory you want to delete, once one of the readings is
displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again
"M" and it will power off.
Picture 4-4
Picture 5
Abnormality & Troubleshooting
Reason
Batteries low
Change the batteries
Pressure
system
is
unstable
before measurement.
Don't move and try again.
Systolic pressure detect failed
Diastolic pressure detect failed
Pneumatic system blocked or
cuff is too tight during inflation
Place the cuff correctly and try
again
Pneumatic system leakage or cuff
is too loose during inflation
Inflation above 300mmHg
Measure again after 5 minutes.
Over 3 minutes while pressure
If the monitor is still abnormal,
above 15 mmHg
please contact the local
EEPROM accessing error
distributor or the factory.
Device parameter check error
Checkout
8/12/09 11:46:10 AM
