Do not charge the appliance for more than 24 hours.
1
Make sure the appliance is switched off while charging.
2
Insert the appliance plug into the appliance (fig. 1).
3
Insert the adapter into the wall socket.
The pilot light will go on to indicate that the appliance is charging.
Optimising the lifetime of the battery
-
After the appliance has been charged for the first time, do not
recharge it between clipping sessions. Continue using it and
recharge it only when the battery is (almost) empty.
-
Discharge the battery completely twice a year by letting the motor
run until it stops.
-
Do not keep the appliance plugged into a wall socket all the time.
-
If the appliance has not been used for a long period of time, it must
be recharged for 12 hours.
Corded clipping
Do not run the appliance from the mains when the battery is fully
charged.
To use the hair clipper when it is connected to the mains:
1
Switch the hair clipper off, connect it to the mains and wait a few
seconds before switching it on.
2
If the battery is completely empty, wait a few minutes before
switching the appliance on.
Using the appliance
Also see the interactive instruction CD-ROM.
Clipping with comb attachment
Select the small or large comb attachment, depending on the desired
hair length.
ENGLISH
7