Magnavox CD130MW9 Manual Del Usario página 31

Marker Setup Marker Setup
This feature allows you to assign a specifi c point on a disc to be called back
later.
To set a marker
1
During playback, press [MODE] repeatedly until
" " or " " appears.
2
Use [Cursor K / L ] repeatedly until marker search menu
appears.
or
3
Use [Cursor s / B] to select an available marker
within 60 seconds.
or
4
When the playback reaches the point at which you
want to set a marker, press [ENTER].
• Marker is now set.
5
Press [RETURN ] to exit.
RETURN
e.g.) DVD
/12 (SEARCH)
e.g.) DVD
e.g.) DVD
e.g.) DVD
To return to the marker later
1
To select a desired marker, repeat steps 1 to 3 in
"To set a marker".
2
Press [ENTER] at the desired marker to start playback
from the specific point which you set.
Note:
• Marker search menu will disappear in about 60 seconds
when there is no input.
• You can mark up to 10 points.
• To clear a marker, select the marker to be cleared, and then
press [CLEAR].
• Ejecting the disc or turning off the power will erase all mark-
ers.
• Selecting " " at step 3 in the section "To set a marker"
will also erase all markers.
e.g.) DVD
e.g.) DVD
31
EN