Operating Instructions - Kobalt SGY-AIR227 Manual Del Usuario

OPERATING INSTRUCTIONS

1. To operate the tool in the forward
direction, push the torque setting switch (D)
to the left (See Figure 1).
2. To operate the tool in the reverse
direction, push the torque setting switch (D)
to the right (See Figure 2).
This tool has 5 forward and 5 reverse torque
settings with the maximum torque being in
the reverse direction.
To select a torque setting in the forward
direction, make sure the torque setting
switch (D) is pushed in all the way to the left
(See Figure 3).
To select a torque setting in the
reverse direction, make sure the torque
setting switch (D) is pushed in all the way to
the right (See Figure 2).
The torque indicator goes from low to high
(See Figure 3).
The smaller the rectangle, the lower the
torque; the larger the rectangle, the higher
the torque.
Turn the torque setting switch (D) either
clockwise or counterclockwise and align the
grove in the knob to the desired torque
settings (See Figure 3).
1
D
2
D
se
3
C
C
D
12
D
D