Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS D'ASSEMBLAGE
2.
Insert eight M6 x 10mm bolts (AA) though the
holes in the firebowl (D) and into the pre-drilled
nuts in the legs (H). Use a Phillips screwdriver
to loosely tighten the M6x10mm bolts (AA), but
do not fully tighten at this time.
Quincaillerie utilisée
AA
M6x10mm Boulon
3.
Attach the leg support ring (I) to the legs
(H) by inserting four M6 x 10mm bolts (AA)
through the holes in the support ring and into
the pre-drilled nuts in the legs. Tighten with a
Phillips screwdriver.
Quincaillerie utilisée
AA
M6x10mm Boulon
4.
Finger tighten four threaded pegs (CC) to
the inside of the fire bowl (D) as illustrated
in figure 4.
Quincaillerie utilisée
CC
Patère filetée
2
D
x 8
H
3
H
x 4
4
x 4
21
AA
AA
I
CC
D
Tabla de contenido
