Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCCIONES DE ENSAMBLAJE
2.
Insert eight M6 x 10mm bolts (AA) though the
holes in the firebowl (D) and into the pre-drilled
nuts in the legs (H). Use a Phillips screwdriver
to loosely tighten the M6x10mm bolts (AA), but
do not fully tighten at this time.
Herramientas y tornillería utilizadas
AA
M6x10mm Perno
3.
Attach the leg support ring (I) to the legs
(H) by inserting four M6 x 10mm bolts (AA)
through the holes in the support ring and into
the pre-drilled nuts in the legs. Tighten with a
Phillips screwdriver.
Herramientas y tornillería utilizadas
AA
M6x10mm Perno
4.
Finger tighten four threaded pegs (CC) to
the inside of the fire bowl (D) as illustrated
in figure 4.
Herramientas y tornillería utilizadas
CC
Clavija enroscada
2
D
x 8
H
3
H
x 4
4
x 4
13
AA
AA
I
CC
D
Tabla de contenido
