Channel Change - ITS EKSELANS RCT 2 Manual Del Usuario

EN
SKIPPING CHANNELS:
Select a channel and press the green button on the remote control and then press the
OK button: the channel will be displayed with a checkmark icon. Changes are confir-
med upon exiting the menu. When the channels are changed, the selected channel
will be skipped. To unblock the selected channel, press the green button and confirm
by pressing the OK button.
Change: select a channel and press the yellow button on the remote control and then
press the OK button: the channel will be displayed with a checkmark icon. Use the up
and down arrows on the remote control to select a new position, away from the original
position, and press the OK button: the channel will move to the selected position.
Reminder! When the LSN is activated, the channel will move next to its logical number.

CHANNEL CHANGE:

Select a channel and press the blue button on the remote control and the new options
will appear:
-Sort: press the red button on the remote control and you can sort the channels by
name, free/coded (A-Z, Z-A), locked.
-Change: press the green button on the remote control and then press the OK button.
Now you can change the channel name.
-Delete: press the blue button on the remote control and then press OK.
The channel will be displayed with a checkmark icon. Confirm changes before exiting
the menu. The channel is deleted.
Radio channel list: enter the menu to display the radio channels and listen to the
desired radio station.
Delete all: delete all channels, open a warning message window, where "yes" must be
selected.
All channels are deleted.
Rename favourites list: change the name of the favourite channels list.
INSTALLATION:
Automatic channel search: automatically searches and saves all television channels
available.
Manual channel search: manual search of television channels.
Channels can be searched based on the number or frequency. After having specified
the desired options, press search to start the search.
LCN (Logical Channel Number: logical channel number): select if you wish to sort the
channels based on their logical number.
This function is a factorypreset function.