Nexgrill 720-0830FP Manual Del Usuario página 19

12. wire connection
Connect the wire from firebox to that from LED light
Fig. 17
battery box . See Fig.17
13.Sear Side Burner Assembly
(a). Loosen but do not remove two
screws which are pre-assembly on the
Fig. 18
right side panel, through sear side
burner shelf keyholes hang sear side
C
burner shelf on two loosened screws.
(b). Using (3) ¼" truss head screws (A),
(3) ¼" flat washer (E), attach sear side
burner shelf (C)to firebox from inside
the firebox. Insert (2) 5/32" truss head
screws (C),(2) 5/32" flat washers (F) to
attach the sear side burner shelf control
panel to the main control panel. Fully
tighten the two loosened screws to
secure shelf to firebox.
H
19