Troubleshooting - GMC GM210S Traducción Del Manual Original

Troubleshooting

Problem
No
operation
Cutting performance poor
GB
Power tool vibrating excessively in use
Mitre or bevel angle difficult to adjust
378634_Z1PKGMANPRO1.indd 12
Possible Cause
Plug fuse
Worn brushes
Power tool fault
Teeth worn or damaged
Incorrect Saw Blade type
Incorrect Saw Blade specification
Incorrectly fitted Saw Blade
Saw blade distorted, bent or damaged
Saw blade incorrectly mounted
Machine fault
Build-up of sawdust
Solution
Replace fuse
Have brushes replaced by an authorised GMC service centre
Contact an authorised GMC service centre
Replace Saw Blade (10)
Replace Saw Blade with correct type for material being sawed
Ensure Saw Blade meets the required blade specification for this mitre saw
Remove Saw Blade and refit exactly as per the instructions in this manual
Replace Saw Blade immediately
Re-fit Saw Blade exactly as per the instructions in this manual
Contact an authorised GMC service centre
Vacuum up sawdust
12
26/10/2016 12:49