Setting The Maximum Charging Current; Advanced Settings - Mennekes AMEDIO Proffesional+PnC 22 T2S Manual De Instrucciones Y De Instalación

6.2.5 Setting the maximum charging current

f Navigate to the "Settings" menu and set the following parameters:
„ "Operator Current Limit (A)"
f Click the "Save" button.
f If necessary, make the appropriate advanced settings in the "Operator" menu.
f When the configuration is concluded, click the "Save & Restart" button.

6.2.6 Advanced settings

Advanced settings can be found in the "Operator" menu in addition to the parameters under "Settings".
The web interface offers some setting options that are not supported by the device. The chapter on "3 Product
description" > "Equipment features" provides an overview of the device functions.
Block 1: Backend-System
Parameter
OCPP ChargeBoxIdentity
(ChargePointID)
Block 2: Backend-System, mobile telephony, network
Parameter
Connection Type
Access Point Name (APN)
APN username
APN Password
SIMcard PIN Number
Network selection mode
Modem Access Technology
Scan network operators at boot Setting that specifies whether the available
Requested Network operator
Network operator name format
24
Description
Identification of the char-
ging point that is sent to the
Backend-System
Description
Connection type to the Backend-System
Name of the access point of your mobile
access
Username for the access point of your
mobile access
Password for the access point of your
mobile access
PIN for unlocking the SIM card
Automatic or manual selection of the mobi-
le network provider
Selection of the mobile telephony standard
mobile network providers will be displayed
Name of the network provider that should
be used in manual mode
Setting that specifies whether the format of
the name of the network provider is alpha-
numeric or numeric
Necessary Remark
for ...
Backend- „ The identification must be identical
System in the Backend-System
„ This setting has to be made sepa-
rately in the slave web interface
Necessary
for ...
Backend-
System /
Mobile tele-
phony
Wireless
communica-
tion
Remark
Preset: "GSM"
„ Only relevant
if "Connection
Type" = "GSM"
„ Information is provi-
ded by your Backend-
System operator.
Only if the SIM card is
locked with a PIN
Preset: "AUTO"
Preset: "AUTO"
Preset: "Off"
Only relevant if
"Network selection
mode" = "Manual"