Repairs; Storage; Troubleshooting - INQUA BR021000 Instrucciones De Uso

5.3 Repairs

Info:
If the compressor
is opened without
authorisation, all guar-
antees and claims
under the warranty will
be null and void.

5.4 Storage

6 TROUBLESHOOTING

Repairs must not be carried out on the INQUA
the manufacturer. If the device needs to be repaired, contact the
manufacturer (see back of instructions for use).
Keep the compressor and all accessories out of continuous direct
sunlight.
Do not leave the compressor connected to the mains when storing
because all electrical devices that are connected to mains electricity
represent a potential hazard.
Fault
The compressor
does not start up.
No aerosol is
coming out of the
nebuliser.
Contact the manufacturer

if the motor is unusually loud,

if it switches off automatically after a few seconds,

if no compressed air is generated,

if the recommended procedure is unsuccessful.
Possible cause
The power plug is
not plugged into the
mains socket
properly.
The nebuliser nozzle
is blocked.
The connection tub-
ing is not connected
properly.
The connection
tubing is leaking.
®
Inhalator except by
Procedure
Check that the
power plug is seated
correctly in the mains
socket.
Clean the nebuliser.
Check that both ends
of the tubing are
seated properly.
Replace the connec-
tion tubing.
45