Completing The Inhalation - INQUA BR021000 Instrucciones De Uso

Info:
To ensure that the
compressor functions
perfectly, it must be
at room temperature
before it is put into
operation.
4.5 Completing
the inhalation
Info:
To ensure that it is
completely discon-
nected from the mains
power supply, the
power plug must be
unplugged from the
mains socket.
Figure 4
42

Fill the nebuliser as described in the instructions for use of the
nebuliser.

Pull the nebuliser up and out of its holder.

Switch the compressor on at the ON/OFF switch (8). The
nebuliser will now generate a clearly visible aerosol mist.

Perform the inhalation as described in the instructions for use of
the accompanying nebuliser.
The inhalation session is complete when no more aerosol is pro-
duced by the nebuliser.

Place the nebuliser back in its holder.

Switch the compressor off.

Disconnect the power plug from the mains socket.

Clean the compressor (see Chapter "Cleaning, maintenance,
repair", Section "Cleaning tasks", page 43).

Prepare the nebuliser and the mask for hygienic re-use as
described in the instructions for use of the nebuliser.

Wind up the power cord in a clockwise direction on the bottom of
the compressor.

When they have dried, stow the parts in the storage compartment
of the compressor.

Keep the INQUA
the reach of children (see Chapter "Miscellaneous", Section
"Storage", page 46).
®
Inhalator in a dry, dust-free place out of