Installation - Rules To Follow; Fitting And Installing The Spa - Iberspa INGROUND SPAS Manual De Instalación Y Usuario

Inground Spa Manual EN

3. INSTALLATION - RULES TO FOLLOW

3.1. FITTING AND INSTALLING THE SPA

Handling of the Spa must be done very carefully and in a controlled manner by several persons.
The Spa must never be held by the pipes.
The Spa should be installed following the criteria below.
No material should be used or located below the Spa and around it (in a minimum perimeter of
one meter) unless it is completely resistant to humidity and water. The Spa warranty does not
cover any damage to materials, decorative or ornamental objects that may deteriorate due to
flooding or atmospheric humidity.
The Spa must be located in a duly adapted space which is adequate for withstanding significant
damp and condensation. If this is not so, the warranty will not cover material or personal
damages.
It is essential to have an adequately sized drain for draining out any water that could reach the
area under the Spa.
The base where the Spa will be installed should be large and strong enough to withstand the
weight of the Spa, the water and the users. If this is not so, the warranty will not cover the
damages caused. Check the building regulations in force.
Prior to the installation, if you believe that for any reason you may have to extract the Spa from
its initial location, you should take this factor into account, and avoid having to break down
masonry or structures and pipes should the Spa have to be unassembled. The warranty does
not include repair of any damages caused in this instance.
Below we provide some basic advice as to how to build foundations for the Spa. It is essential to
comply with building regulations in force in all cases.
Fig. 13 Foundations Diagram.
16