General Electric Diagram - Iberspa INGROUND SPAS Manual De Instalación Y Usuario

Inground Spa Manual
Air circuit.
The mission of the air circuit is to return air from the blower pump to the Spa. The air is
distributed inside the Spa via a series of blowing nozzles located on the floor or on the seats of
the Spa.

2.5. GENERAL ELECTRIC DIAGRAM

1 Main electricity cabinet
2 Junction box
3 Tank level probes control
4 Filling solenoid valve
5 Level probes
6 Projector
All electrical components of the Spa must be connected to the main electricity cabinet.
The cabinet is in charge of controlling the different pumps, programming the filter cycles,
controlling the heating, the level of the balance tank, the provision of water to the network, the
operation of the lamp, the ozonator ... And it also receives and manages the signal of the push
buttons for the activation of the massages.
Fig. 12 General Electric Diagram
7
8
9
10
11
12
15
Electric heating
Temperature probe
Flow detector
Filtration pump
Ozonator
Air / water massage push buttons
EN