Tabla de contenido
Instructions and guarantee
Now the measurement unit has been changed.
Proceed with the measurement according to paragraph "INSTRUCTIONS FOR
A CORRECT USE".
MEMORY FUNCTION
This device stores in memory the last 25 measurements performed to evaluate
eventual variations. The measurements are stored automatically after that the
thermometer has switched off.
Only forehead temperatures (HEAD) included between 22°C and 42.2°C (71.6°F
and 108.0°F) are stored. After the first 25 measurements, the oldest data are erased
automatically. To call up saved measurements, switch on the thermometer, and
press the key "ON/MEM" (Every time the key is pressed, saved data are scrolled).
On the upper part of the display appears the symbol "M" and before each stored
data appears the corresponding number (1= most recent measurement - 25 oldest
measurement).
The stored measurements are displayed for about 1 minute.
After about 1 minute from releasing the "ON/MEM" key, the device switches off
automatically.
CLEANING AND MAINTENANCE
Before and/or after each use, clean the probe of the thermometer with a soft cotton
cloth moistened with water or alcohol to assure accurate measurements and to
avoid microbial contaminations.
The probe is the most delicate part of the thermometer; pay utmost care during the
cleaning. Let the probe dry completely for about 30 minutes. The thermometer body
has to be cleaned with a soft and dry cloth. THE BODY OF THE THERMOMETER
HAS NOT TO BE WASHED WITH WATER. Absolutely neither use abrasive products,
nor plunge the thermometer in water or other liquids.
Store the thermometer in a dry and clean place away from direct sunlight.
TROUBLE SHOOTING
Drawing 1
Problem: The "HEAD" writing blinks: the mechanism is adjusting itself.
Solution: Await some seconds until the "HEAD" message stops to blink.
Drawing 2
Problem: Discharged battery
Solution: Replace the battery
Drawing 3
Problem: The thermometer detects rapid room temperature changes.
Solution: It is necessary to consider that the thermometer has to be in the room
where the measurement is performed about half an hour before performing the
measurement, while the person has to be in the room at least 10 minutes before.
(Room temperature has to range between +10°C and +40°C / between 50°F and
104°F)
Drawing 4
Problem: Room temperature is not included between +10°C and +40°C / between
50°F and 104°F.
Solution: It is necessary to consider that the thermometer has to be in the room
where the measurement is performed about half an hour before performing the
measurement, while the person has to be in the room at least 10 minutes before.
(Room temperature has to range between +10°C and +40°C / between 50°F and
104°F)
19
GB
English
Tabla de contenido
