Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Forward
1
Forward
5. Position the brackets under the bed , at the four attachment locations and align with the 5/8" drilled
holes in the bed . See Illustrationtration "A" and "C" for details on bracket location,
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information/
Tech Support. ©2018 LKQ Specialty Products Group. All Rights Reserved . July 25, 2018‐Rev3 Page‐4
22"
Use the 1
from the end of the
base rail to drill hole
for 5/8" bolt in both
rail locations.
Use the 1
from the end of the
base rail to drill hole
for 5/8" bolt in both
rail locations.
TRUCK BED
DRILLED
HOLE 2 IN
HOLE 1 &
FRAME &
WHEEL BOLT
CARRIAGE BOLT
Illustration "C"
st
slot
st
slot
DRILLED
HOLE 3,4 &
WHEEL BOLT
DRIVER SIDE SHOWN
(10 Bolt Base Rails #30686)
29-7/8" 6'-6" & 8' Box
(4 Bolt Base Rails #31323)
30-5/16" 6'-6" & 8' Box
Diagonal
measurements must
be the same both
directions as shown.
Rear edge of truck bed
Illustration "B"
3
TRUCK
FRAME
Tabla de contenido
