Tabla de contenido
OVERLOAD
PROTECTION
RESET button
Bouton de remise
en circuit de
la protection
de surcharge
Protector contra
sobrecargas
(Botón de
restauración)
If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
Replace full bag if necessary.
Wait approximately thirty (30) minutes, plug vacuum cleaner in, and turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
Overload Protection
NOTE: The vacuum cleaner motor will
continue to run.
TO CORRECT PROBLEM:
TO RESET:
Thermal Protector
- 20 -
The OVERLOAD PROTECTION
RESET button stops the nozzle
motor when the brush jams to
prevent belt breakage.
Unplug electrical cord.
Check nozzle areas for excessive
lint buildup or jamming.
Clean jammed area.
Press reset button on top of the
nozzle. Plug in and turn on vacuum
cleaner.
Tabla de contenido
