GYS GYSMATIC 9/13 AIR TRUE COLOR XL Instrucciones De Seguridad página 13

Clear shade
Dark shade
Filter dimension
Reaction speed
Power supply
Weight
Field of vision
Applications
Warranty
Application temperature
Storage temperature
INSTRUCTIONS
When the respiratory system is off, no air purfication/respiratory protection is possible. The concentration of carbon dioxyde increases
and the oxygen level decreases, thus the system must not be used when it's switched off.
THE RESPIRATORY PROTECTION SYSTEM MUST NOT BE USED :
• in a dangerous environment for the user's health and safety, an environment with an oxygen level below 17% or containing unknown substances.
• In confined or non ventilated environments such as cuves, etc.
• Near flames or projections.
• in an explosion risk zone.
• In a very windy zone.
• if the respiratory protection system stops working: the user must evacuate the contaminated area immediately.
• If the filter is not installed.
IT IS ESSENTIAL :
• that nothing comes in contact or alters moving parts.
• do not try to modify the device or the filter.
• that no liquid or fluid goes into the device – especially the motor, the liquid and the battery.
Make sure that the hood (made of cloth) is properly postionned and not damaged. The filtration efficiency depends on it. The
protection level decreases if the hood is not postionned properply (big beard, long hair, etc).
Make sure that the air hose is not obstructed or folded.
The unit must be positionned behind the user to reduce these risks.
The filter must not be installed directly in the helmet, nor modified. An effective filtration cannot be ensured if one or some of the
filter's parts are modified.
The respiratory protection system must only be used by a qualified/trained user.
The filter must not be modified to fit other filtration units.
If one of these recommendations is not followed, the warranty is automatically void.
IT IS RECOMMENDED TO LEAVE THE CONTAMINATED AREA IF :
• the minimum air flow alarm beeps.
• breathing becomes difficult.
• a feeling of dizziness or loss of balance.
• one or several of the device's parts are damaged.
• the air flow suddenly decreases or stops.
• contaminated air or elements are felt inside the helmet.
GYSMATIC 9/13 XL • 5/13 XXL
9/13 XL
4
9-13
133 x 114 mm
0,08 ms
solar + battery
1,7 kg
100 x 60 mm
MMA 5>400 A / TIG
SMAW GTAW
MIG-MAG 5>500A
GMAW/FCAW
133 x 114 mm
solar + battery
100 x 83 mm
2>300A MMA 5>400 A / TIG
SMAW
MIG-MAG
2 years
-5°C / + 55°C
-10°C / + 60°C
EN
5/13 XXL
4
5-13
0,08 ms
1,7 kg
2>300A
GTAW
5>500A
GMAW/FCAW
13