Wacker Neuson PT2A Manual Del Operador página 35

The engine maintenance schedule(s) in this chapter are reproduced from the
engine owner's manual. For additional information, see the engine owner's
manual.
wc_tx004607en.fm
Engine Maintenance: Honda GX160
MAINTENANCE SCHEDULE
REGULAR SERVICE PERIOD (3)
Perform at every
indicated month or
operating hour interval,
whichever comes first.
ITEM
Engine oil
Check level
Change
Reduction case oil Check level
(applicable types)
Change
Check
Air cleaner
Clean
Replace
Clean
Sediment cup
Spark plug Check-adjust
Replace
Spark arrester Clean
(applicable types)
Check-adjust
Idle speed
Valve clearance Check-adjust
Combustion Clean
chamber
Fuel tank & Clean
filter
Fuel tube Check
* Internal vent carburetor with dual element type only.
Cyclone type every 6 months or 150 hours.
INTERNAL VENT
CARBURETOR TYPE
BREATHER TUBE
TUBE CLIP
** Replace paper element type only.
Cyclone type every 2 years or 600 hours.
(1) Service more frequently when used in dusty areas.
(2) These items should be serviced by your servicing dealer,
unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service
procedures.
(3) For commercial use, log hours of operation to determine
proper maintenance intervals.
(4) In Europe and other countries where the machinery directive
2006/42/EC is enforced, this cleaning should be done by your
servicing dealer.
Failure to follow this maintenance schedule could result
in non-warrantable failures.
Each
First
Every 3
Every 6
Every
Use Month Months Months Year
or or or or
20 Hrs 50 Hrs 100 Hrs 300 Hrs
(1)
(1)
(4)
(2)
(2)
After every 500 Hrs. (2)
(2)
Every 2 years
(Replace if necessary) (2)
STANDARD TYPE
BREATHER TUBE
35
Refer
to
Page
9
9
9–10
10
10
11–12
12
12
13
13
Shop
manual
Shop
manual
Shop
manual
Shop
manual
770078