Machine Description And Intended Use - Wacker Neuson PT2A Manual Del Operador

Safety Information
1.2

Machine Description and Intended Use

This machine is a centrifugal trash pump. The Wacker Neuson Trash Pump
consists of a tubular steel frame surrounding a gasoline engine, a fuel tank, and an
impeller pump with ports for water suction and discharge. The engine rotates the
impeller during operation. Waste water is drawn into the pump through the suction
port and expelled through the discharge port. The operator connects hoses to the
pump and routes them so that water and solids are drained from the work area and
discharged into an appropriate location.
This machine is intended to be used for general de-watering applications. This
machine is intended for the pumping of clear water, or water containing solids up to
the size stated within the product specifications, and up to the flow, head, and
suction lift limits also stated within the product specifications.
This machine has been designed and built strictly for the intended use described
above. Using the machine for any other purpose could permanently damage the
machine or seriously injure the operator or other persons in the area. Machine
damage caused by misuse is not covered under warranty.
The following are some examples of misuse:
■ Pumping flammable, explosive, or corrosive fluids
■ Pumping hot or volatile fluids that result in pump cavitation
■ Operating the pump outside of product specifications due to incorrect diameter
hoses, incorrect length hoses, other inlet or outlet restrictions, or excessive
suction lift or head
■ Using the machine as a ladder, support, or work surface
■ Operating the machine outside of factory specifications
■ Operating the machine in a manner inconsistent with all warnings found on the
machine and in the Operator's Manual
This machine has been designed and built in accordance with the latest global
safety standards. It has been carefully engineered to eliminate hazards as far as
practicable and to increase operator safety through protective guards and labeling.
However, some risks may remain even after protective measures have been taken.
They are called residual risks. On this machine, they may include exposure to:
■ Heat, noise, exhaust, and carbon monoxide from the engine
■ Fire hazards from improper refueling techniques
■ Fuel and its fumes
■ Personal injury from improper lifting techniques
■ Projectile hazard from discharge
■ Crushing hazards from a tipping or falling pump
To protect yourself and others, make sure you thoroughly read and understand the
safety information presented in this manual before operating the machine.
PT2A / PT3A / PT4A
12
wc_si001089en.fm