Walker W-300 Guia Del Usuario página 17

PROGRAMMING NUMBERS INTO MEMORY
➤ Programming
The Walker W-300 allows you to program
into three extra large programmable
buttons or seven memory keys. By doing
so, you will only have to press one button
to place a call.
Preprinted inserts have been provided for
you to place in the extra large program-
mable buttons. To remove the button
covers, locate the ridge on the right and
left side of the button. Grasp the ridge with
your finger tips and pull up on the button,
removing it from the telephone. Insert the
selected symbol into the button cover and
place back into the telephone.
➤ To Program Numbers into the
Walker W-300 Telephone
1. Select the location you wish to store for
each memory button. The Walker W-300
telephone will let you store up to 32 digits
with each button.
2. Select the correct TONE/PULSE setting
you normally dial in. (Remember, some
long distance services require TONE
dialing.)
3. Pick up the handset from the phone
base, press and release the "PROGRAM"
button on the base unit.
4. Dial the number you wish to store. The
number is not transmitted while you are
programming it. You can program a pause
into the dialing sequence, if necessary.
Since there is not a separate pause button
on the phone, the redial button serves this
purpose during programming. Remember,
you can store up to 32 digits and the
pause function counts as 1 of those digits.
Note: Programming in the pause function
will cause the phone to wait 3 seconds
before dialing any more numbers. For
example: Pressing a memory button that
has 9<P>555-1212 programmed into it will
dial the number 9, then wait 3 seconds
and dial 555-1212. In most cases, you will
not need to use a pause.
5. Press the "PROGRAM" button again.
6. Select the appropriate memory storage
button. Press and release this button.
7. Place handset back into cradle.
8. Repeat steps 3 through 7 for all other
memory storage locations.
➤ To Dial Programmed Numbers
1. Pick up the handset and listen for a dial
tone.
2. Press the appropriate Memory Storage
Button.
3. The number will be dialed automatically.
E
N
G
L
I
S
H
17