Hold; Surge Protection; Headset Port; Backlite Keypad - Walker W-300 Guia Del Usuario

➤ Hold

This advanced feature on your Walker
W-300 allows you to put a call on hold,
hang up and switch to another extension
or have a private conversation that you
don't want the person on the other end of
the phone to hear.
You will be able to hear the person on the
other end, but they won't be able to hear
you while the hold indicator light is on.
The hold light will be on any time the hold
button has been pressed. A call will stay
on hold until you pick up a receiver, or
press and release the hook switch. Press-
ing the hold button a second time
will not take the call off hold.
➤ To Use the Hold Feature:
1. While a telephone call is in progress,
press the hold button once to place the
call on hold. The red hold light will turn on.
2. Hang up the receiver.
3. To take the call off hold:
A. Simply lift the Walker Clarity receiver
out of the cradle.
-OR-
B. Pick up another telephone extension
in your home.
WALKER W-300 FEATURES
-OR-
C. If you did not return the handset to the
cradle after pushing the hold button, press
and release the hook switch once only.
4. The hold light will turn off.

➤ Surge Protection

The unit is equipped with a resettable
fuse. The fuse will automatically reset
within 30 minutes after activation once the
surge condition has subsided.

➤ Headset Port

The W-300 is equipped with a 2.5 mm
jack for use with a compatible headset,
allowing for use in a hands free mode. To
attach headset, plug the headset into the
headset port located on the right side of
the telephone. Depressing the headset
button on the front allows calls to be made
without lifting the handset to seize the line.
When the headset is plugged in, the
handset is disabled.

➤ Backlite Keypad

The keypad features large translusent
back lite buttons that will make calling
easier.
E
N
G
L
I
S
H
15