Last Number Redial; Flash - Walker W-300 Guia Del Usuario

pulse mode, switch to tone mode to
interact with the automated answering
system, switch back to pulse mode when
your call is done. When switching from
Pulse to Tone during a call, there will be a
3 second delay from the time you first
push a key in tone mode until the key
press is transmitted. You cannot switch
from tone to pulse during a call.
Important: You must have tone signaling
service to use the TONE feature on the
Walker W-300. If in doubt, contact your
local telephone company.
➤ To Set the
TONE/PULSE Switch:
1. Move the switch towards the correct
setting.
2. Depress the hookswitch once.
3. The phone will now dial in the mode you
selected.

➤ Last Number Redial

Last Number Redial allows you to auto-
matically redial the last telephone number
you called. This feature is convenient for
redialing numbers which are busy. The
phone number stored for redial will be
reset with every new call you make.
14
WALKER W-300 FEATURES
➤ To Operate
Last Number Redial:
1. Depress the hookswitch to get a new
dial tone.
2. Press the "Redial" Button once.
3. Stay on the line, and your call will be
dialed.
The last number dialed will be stored in
the Walker W-300 for you until you dial
another number or disconnect the tele-
phone from the wall jack.

➤ Flash

Flash is a special feature that is required
to use some calling services provided by
your local phone company, such as call
waiting. Consult your guide to these
services which is available from your local
phone company. Flash serves the same
purpose as pressing and releasing the
hook switch very quickly.
➤ To Use the Flash Feature:
Simply press the Flash button at the
appropriate time as outlined in the guide
provided by your local phone company.
Walker W-300