Operation - Delta ShopMaster MS450 Manual De Instrucciones

FASTENING MACHINE TO SUPPORTING
SURFACE
Before operating your compound miter saw, firmly mount
it to a workbench or other supporting surface. Four
holes, (A) Fig. 9, are provided for fastening the saw to a
supporting surface.
When frequently moving the saw from place to place,
mount the saw to a 3/4" piece of plywood. The saw can
then be easily moved from place to place and the
plywood can be clamped to the supporting surface using
"C" clamps.
OPERATIONAL CONTROLS AND ADJUSTMENTS
STARTING AND STOPPING MACHINE
To start the machine, depress switch trigger (A) Fig. 10.
To stop the machine, release the switch trigger.
This saw is equipped with an automatic electric blade
brake. As soon as the switch trigger (A) Fig. 10, is
released, the electric brake is activated and stops the
blade in seconds.
A TURNING SAW BLADE CAN BE
DANGEROUS. AFTER COMPLETING CUT, RELEASE
SWITCH TRIGGER (A) FIG. 10, TO ACTIVATE BLADE
BRAKE. KEEP CUTTINGHEAD DOWN UNTIL BLADE
HAS COME TO A COMPLETE STOP.
THE TORQUE DEVELOPED DURING
BRAKING MAY LOOSEN THE ARBOR SCREW. THE
ARBOR SCREW SHOULD
PERIODICALLY AND TIGHTENED IF NECESSARY.
LOCKING SWITCH IN THE "OFF"
POSITION
IMPORTANT: When the miter saw is not in use, the
switch should be locked in the OFF position using a
padlock (B) Fig. 11, with a 3/16" diameter shackle to
prevent unauthorized use of the saw.
In the event of a power outage, always lock switch in
"OFF" position until the main power is restored.
OPERATIONS
BE CHECKED
12 12
A
A
Fig. 9
Fig. 10
Fig. 11
A
A
A
B