Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note: The manufacturer reserves the right to change these specifications without
notice.
Symbols
The following symbols may appear on the device or packaging:
Attention, consult accompanying documents;
21
Drip proof;
20
European RoHS;
8
Maximum humidity;
charge level;
Audible alert mute;
package is damaged;
European Authorized Representative;
restricts these devices to sale by or on the order of a physician).
Disposal
Disposal of the battery and the power supply unit should be carried out in accordance with
applicable national laws and regulations. If you need information on these disposal systems,
please contact your local waste administration. If you require information on collection and
disposal of your ResMed device please contact your ResMed office, local distributor or go to
www.resmed.com/environment.
General warnings and cautions
WARNINGS
•
Lithium ion batteries have built-in safety protection circuits, but can still be
dangerous if they are not used correctly. Damaged batteries can become
inoperative or catch fire.
•
Due to risk of fire or electric shock:
-
do not place the RPS II near open fire or heaters.
-
do not expose the RPS II to direct sunlight or heat (for example behind a
car window).
-
do not expose the RPS II to water, rain or high moisture levels.
-
do not short-circuit the RPS II.
-
do not use a damaged RPS II.
-
do not open the RPS II, AC charger or the DC converter.
•
Make sure to revert to AC power when the remaining capacity of RPS II and/or
device internal battery is low.
•
Make sure to periodically recharge the battery due to effects of self-discharging.
•
As the battery ages, the available capacity decreases. When the remaining
battery capacity is getting low, do not rely on the RPS II as the primary supply.
•
Ensure the internal battery of any connected device is kept charged up to
provide backup power in the event of loss of power from RPS II.
•
Only use a supplied ResMed 90W AC power supply unit or DC converter for
charging the RPS II.
No protection;
0
Batch Code;
Temperature limitation (storage and transport);
Canadian Standards Association;
Read instructions before use;
No protection;
Serial number;
O I
DC input/output;
Prescription only (In the US, Federal law
Class II equipment;
Catalogue Number;
DC on/off;
Do not use if
Manufacturer;
Battery
Keep dry;
English 7
Tabla de contenido
