Velleman VMB6IN Guia De Inicio Rapido página 2

1
PB
PB1 PB2 PB3 PB4 PB5 PB6
1 2 3 4 5 6
velleman
VMB6IN
6 Channel input module
ADDR.
Learn
F0 : 65ms debounce time
F1 : 1s reaction time
F2 : 2s reaction time
F3 : 3s reaction time
ON Rx Tx
-
+
12V L H PB PB
BUS COM
SUPPLY
2 3 4
8
ADDR.
9
Learn
F0 : 65ms debounce time
F1 : 1s reaction time
F2 : 2s reaction time
F3 : 3s reaction time
Term
ON Rx Tx
5
6 7
Removing the front
1 Inputs push button/switch
2 12V supply
3 Velbus
4 Common input for push buttons/switches
5 Power LED
11 Reception LED
6
7 Forwarding LED
8 Indication LEDs
9 Adress setting
Enter a unique address (from '00' to 'FE' except for 'F0',
'F1', 'F2', 'F3' and 'FF') for each module
10 Termination
If the module is connected at the start or end of a cable on
the VELBUS, place the 'TERM' jumper.
10
Remove the jumper in all other cases.
Remark: If different cable wiring topologies (tree, star,
loop, ...) are used, place a jumper on the end module of the
longest cable only, NOT on each end point.
11 Manual control
See also connection examples on page 13 !