Spanset 1492-2 Borrador De Las Instrucciones página 16

1 Functional description and application
Round slings/round sling hangers are intended for slingers (authorized
persons) to use for lifting loads. Round slings/round sling hangers
must be used as intended. The various SpanSet round slings/round
sling hangers can be clearly identified by their sewn label
accompanying documents. All modifications to round slings are
forbidden. SpanSet Round slings/round sling hangers are made of re-
inforced synthetic fibres (e.g. polyester ,polyamide or polypropylene).
Their production is DIN EN ISO 9001 certified.
2 Safety instructions and handling
Only trained (authorized) persons may fasten loads.
When choosing and using slings, the weight and fastening
method must be considered
geometry, surface condition and design features of the load are crucial
criteria for choosing the sling.
A sling's nominal load capacity can change depending on the
fastening method. The change in load capacity is shown by the
load fastening factor (M). A sling's nominal load capacity is indicated in
the "simple direct" fastening method. The load fastening factor (M) for the
rest of the fastening methods
operating manual.
Using round slings/round sling hangers with chemicals is
permitted only with manufacturer approval. The necessary data
include: chemical, concentration, temperature and retention time.
Before storage and reuse, the user must clean round slings/
round sling hangers that have come into contact with acids, lye
or other aggressive substances. Ask your SpanSet dealer or SpanSet
itself about cleaning processes.
Page
EN
1
14
18 20 21 22 23
Exemplary label
. The weight,
18 20 21 22 23
can be found in this
and
1
26