Spanset 1492-2 Borrador De Las Instrucciones página 15

hangers and break them.
•
Do not use the round slings in a chain sling. The round slings may
7
slide together and the load may fall.
•
Never simply lay round slings/round sling hangers over the crane
8
hook. The round slings/round sling hangers may slide and the load
may fall.
•
round slings/round sling hangers must not be pinched or lie one
9
above another. This will considerably reduce strength.
•
round slings/round sling hangers must not be placed against
10
sharp edges, slide over them and/or be pulled across them. The
lifting strap may be severed and the load may fall down (see the
definition of sharp edge
•
Load hooks must not be loaded on the hook tip. The false load
11
considerably reduces load capacity.
•
Do not put a load down on round slings/round sling hangers.
12
round slings/round sling hangers may become damaged.
•
Load hooks must be used only in such a way as to prevent unin-
13
tentional unhooking. The load may fall.
•
Metal fittings (such as load hooks) must never be used in acids.
14
This will considerably reduce strength.
•
During lifting, the load should never get out of control. Swinging
15
or rotating loads may hurt buildings, machines or people, and
components may fall.
•
Observe local occupational safety regulations and manufacturers'
16
instructions! Following these instructions helps prevent accidents.
•
round slings may take on an electrostatic charge, so their use is
17
forbidden underground and in explosive zones.
Table of Contents
1 Functional description and application
2 Safety instructions and handling
3 Operating round slings/round sling hangers
4 Inspection, maintenance, repair and end of use
5 Storage and cleaning
6 Training and important things to know
1
A "sharp edge" means when the radius "r" of the transported goods' edge is smaller than
or equal to the thickness "d" of the lifting strap or round sling.
).
1
Page
EN
13