Alarm Recording - Samsung SVR-1280 Instrucciones De Instalación Y Operación

ALARM RECORDING

If the VCR is connected to equipment with an alarm output such as a frame switcher,
motion detector or door switch, the VCR will function according to the time and mode
selected on the ALARM REC menu when an alarm is received.
The below diagram is set 6H mode for ALARM REC.
L18H~L30H
L18H~L960H
mode recording
Timelapse recording
Start of Enter of
recording alarm signal
Connecting
method
Connect the alarm • Select to MODE and
DURATION on
output equipment
ALARM REC SETUP
as follows;
in setting MENU3.
(Refer to ALARM
1 ALARM IN 2 ALARM OUT 3 ALARM RESET 4 ERROR OUT 5 TRIGGER OUT
6 TAPE END OUT 7 SERIES OUT 8 GND 9 SERIES IN 10 1 SHOT RECIN
REC SETUP, page 16)
1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10
• When connecting with
IN
SAMSUNG'S FS-
IN OUT
OUT
81MA (FRAME
AUDIO
VIDEO
SWITCHER),it is
convenient, if the
switch is placed in
VIDEO automatic position.
SORTIE
MASSE
OUT ALARME
ALARM
RESET
(Refer to page 38)
L18H~L30H
6H
L18H~L960H
mode recording
mode recording
Timelapse recording
Alarm recording
Enter of alarm reset
or over selected time
Operating
method
• AUTO: The alarm recording time is
• 20sec~5min: Alarm recording is made
• TAPE END: Alarm recording is made
• When the alarm signal is entered, the
• When the alarm recording is ended,
• When you want to cancel the alarm
• When an alarm signal is received and
6H
mode recording
Alarm recording
Enter of
alarm signal
Description of
operating
automatically determined by input of
the alarm signal.
for 20 seconds~5 minutes after input of
the alarm signal.
up to the end of the tape after input of
lthe alarm signal.
on the front display is turned on.
the on the front display flashes.
during alarm recording, make a
connection between the alarm release
and the alarm grounding for more than
0.5 second, when the alarm release is
entered, the alarm recording is stopped.
the BUZZER ON is selected in the
menu, the alarm sounds continuously.
To silence the buzzer, press any button.
32