Before First Use; Operation - Unold 8035 Instrucciones De Uso

25. The surface of the cover may become hot
during operation. Therefore always use the
handles of the cover.
26. Do not move the appliance as long as it
is in operation, to prevent scalding from
splashing water.
27. Do not use the appliance with accessories
of other manufacturers or brands, to prevent
damage.
28. Disconnect the appliance from the wall
socket after use and prior to cleaning. Never
leave the appliance unattended when it is
connected to the wall socket.
29. Let the appliance cool off before cleaning it.
30. Never open the casing of the apppliance.
There is danger of electric shock.
the manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEfORE fIRSt USE

1. Remove all packaging materials and any
transport safety devices.
2. Clean all parts with a damp cloth, as
described in the chapter "Cleaning and
care" on page 11.

OPERatION

1. Before using the appliance the first time,
remove all packaging materials. Wipe the
water tray, the egg holder and the lid with
a damp cloth.
2. Fill the enclosed cup with cold water at least
up to the MIN mark and pour the water into
the water tray.
3. Pierce the blunt end of the eggs with the
egg piercer. This is important to avoid that
the eggs burst during cooking.
atteNtIoN.
risk of injuries by the egg piercer!
4. Place the eggs on the egg holder.
5. Place the egg holder with the eggs on the
water tray and close the lid.
6. Select the desired degree of hardness:
1 – very soft
2 – soft
3 – medium
4 – hard
7. These seetings apply to medium egg sizes.
Depending on the size and number of eggs
the results may differ. The selector key
allows an infinitely variable adjustment of
the cooking time.
10
All manuals and user guides at all-guides.com
31. Check the appliance, the wall socket and
32. If the supply cord is damaged, it must be
3. Connect the base to the mains supply by
4. Check if the appliance is placed firmly.
8. Put the plug into the receptacle and switch
9. When the eggs are cooked, a buzzer
10. Switch off the appliance (turn switch to 0)
11. Remove the egg holder with the eggs from
12. To keep the eggs warm, place the egg holder
13. For serving take the egg cooker (water tray
14. Unplug the appliance after use.
the lead cable regularly for wear or damage.
In case the lead cable or other parts appear
damaged, please send the appliance or the
base to our after sales service for inspection
and repair (for address, see warranty terms).
Unauthorised repairs can constitute serious
risks for the user and void the warranty.
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
means of the lead cable (230 V~, 50 Hz).
on (switch position I).
sounds.
and remove the lid.
attention:
take care of escaping hot steam!
since the lid is very hot, use the handles
to lift off the lid and place it only on
heat-resisting surfaces!
the water tray and hold them under cold
water. If the boiling process is not stopped
immediately after the buzzer sound is heard,
eggs will continue to boil and become
harder.
with the eggs on the water tray and close
the lid again.
and lid) from the base station by means of
the handle recesses at the side.