Taurus ROWZER Instrucciones Originales página 20

regularly and remove any food
remains.
- If the appliance is not in good
condition of cleanliness, its surface
may degrade and inexorably affect the
duration of the appliance's useful life
and could become unsafe to use.
The appliance is suitable for cleaning
in hot soapy water or in a dishwasher
(using a soft cleaning program):
- Jar Lid (D)
- Blade (E)
- Vessel (F)
- Jar (G)
- Vessel lid (J)
- The draining/drying position of the
parts washable in the dishwasher or
sink must allow the water to drain
easily (Fig.6).
- Next, dry all the parts before
assembling and storing them.
Spindle cleaning function:
- Fit the jar with the empty vessel into
the machine
Press the "CLEANING" button
- The screen will display the message
"Cleaning Wait" and the spindle will
lower.
- When the spindle reaches the
bottom, the screen will display the
message "Cleaning Remove the JAR"
- Move the machine forward (Fig.7).
- Remove the drip tray (C)
- Remove the jar and the spindle will
come into view (Fig.8).
- Clean the spindle with a damp cloth.
- When the jar is positioned, the
machine will return to the start
setting.
Changing the air filter
- This machine has an active
carbonium filter in its air inlet (Fig.9).
- It is used to purify the air injected
into the ice-cream by eliminating oil
vapours, flavours and odours.
- To change the filter, open the back
of the machine, remove the used filter
and fit the new one.
- We recommend changing the filter
every 4 or 6 months.
Anomalies and repair
- If a fault occurs, call the customer
hotline indicated in the warranty. Do
not attempt to dismantle or repair it,
as this may be dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
If any anomaly is detected, check the
following table: